HT1110S 10KVA

INVT UPS 1110s 10KVA

Online,pure sine wave,10KVA/9KW,192VDC,with 16pcs 12V/9AH batteries

Technical Specs 

INPUT

• Cold Start YES, default frequency=50Hz or settable
• Acceptable Input Voltage 50%~125%(220VAC/230VAC/240VAC)
• 100% load@80%~125%
• 90% load@70%~80%
• 80% load@60%~70%
• 65% load@50%~60%
• Phase Single phase in,single phase out
• Transfer Voltage Range
• -Line low transfer 110VAC/115VAC/120VAC
• -Line low recovery 116VAC/122VAC/127VAC
• -Line high transfer 275VAC/288VAC/300VAC
• -Line high recovery 268VAC/279VAC/291VAC
• Input Power Factor ≥0.99
• Input Frequency Range 40Hz – 70Hz
• Generator Support Any Generator.

OUTPUT

• Frequency adaptable Settable

Power

• -Power(kVA) max 10
• -Power(kW) max 9

Output Voltage

• -Waveform Pure sine wave
• -Nominal voltage 220/230/240VAC
• -Voltage regulation ± 1 %
• -Transient response   ≤5% (50% – 100% -50%)
• -Transient recovery ≤15ms (0% – 100% -0%)
• -Voltage distortion ≤1% THD, linear load
• ≤5% THD, non-linear load

Output Frequency

• -Synchronization range settable,±3Hz default
• -Slew rate 0.5~5Hz/s,2Hz/s default
• -Battery mode (50±0.05) Hz

Transfer Time

• -Line mode to battery mode 0
• -Inverter to bypass 0

Efficiency

• -Line mode with battery full charged 93.0%
• -ECO mode 98.0%
• -Battery mode 92.0%
• Noise <48dB@<70%load,70%load;1m away
• Overload Capability (Line Mode) 110%: Transfer to bypass after 10 mins
• 130%: Transfer to bypass after 1 min
• 150%: Transfer to bypass after 30s, shutdown after 1 min.(Line mode)
• Overload Capability (Battery Mode) 110%: Shutdown after 10mins (Battery mode)
• 125%:Shutdown after 10s(Battery mode)
• >125%: Shutdown after 1s (Battery mode)
• Crest Ratio 3:1

BATTERY

• Rating/Type 12VDC/9Ah
• Quantity 16
• DC Voltage 192VDC
• Back-up Time 3.5mins @80% load
• Battery-Low Voltage (176±3)VDC

Charger

• -Charging voltage (220±1%)VDC
• -Charging current (max) 1A
• -Charging time 8h recharge to 90%
• Leakage current <1mA

INDICATOR & ALARM

• Display LED+LCD
• Alarm: Fault Continuous beeping

INTERFACE

• Smart RS232 Standard Cable support INVT Power Monitor Software
• B type USB(optional) Standard Cable support INVT Power Monitor Software
• EPO Remoted EPO function for customer. Short to activate
• Dry Contactor(optional) DB9 type and phoenix terminal type for selection. (6 output ports, 1 input port) UPS fault alarm, general alarm, bypass mode, UPS normal mode, battery low voltage alarm, utility failure alarm, remoted shutdown.
• SNMP(optional) Power Managment from SNMP Manager and Web Browser
• Option SNMP, USB, Dry Contactor(AS400),Parallel Kit, ECO Kit, External Battery Cable(standard model), Maintenance Bypass, Maintenance Bypass Detecting Kit
• Reserved function Can be designed as deffirent function according to customer’s appliction
• Free Shipment in Cairo